What To Know
- Release the button and turn the ignition to the “OFF” position.
- Only reset the PCM as a last resort and if you have a professional automotive diagnostic tool.
- No, it is important to diagnose and resolve the issue causing the CEL before resetting it.
Experiencing issues with your Jeep Renegade? A reset can often solve common problems and restore functionality. This comprehensive guide will provide step-by-step instructions on how to reset your Jeep Renegade in various scenarios. From simple instrument cluster resets to more complex system resets, we’ve got you covered.
Resetting the Instrument Cluster
1. Turn the ignition to the “ON” position. Do not start the engine.
2. Fully press and release the gas pedal three times within 10 seconds.
3. Turn the ignition to the “OFF” position.
Resetting the Tire Pressure Monitoring System (TPMS)
1. Inflate all tires to the recommended pressure.
2. Start the vehicle and drive for at least 20 minutes.
3. Turn the vehicle off and allow it to cool down for at least 1 hour.
Resetting the Oil Life Monitor
1. Turn the ignition to the “ON” position. Do not start the engine.
2. Press and hold the “OK” button on the steering wheel for 10 seconds.
3. Release the button and turn the ignition to the “OFF” position.
Resetting the Check Engine Light (CEL)
Note: Only reset the CEL if you have diagnosed and resolved the underlying issue causing it.
1. Disconnect the negative battery terminal.
2. Wait 10 minutes.
3. Reconnect the negative battery terminal.
4. Start the vehicle and let it idle for 5 minutes.
Resetting the Transmission Control Module (TCM)
1. Turn the ignition to the “ON” position. Do not start the engine.
2. Shift the transmission into “Park.”
3. Turn the ignition to the “OFF” position.
4. Wait 30 seconds.
5. Turn the ignition to the “ON” position.
6. Shift the transmission into “Drive.”
Resetting the Adaptive Cruise Control (ACC)
1. Turn the ACC system off.
2. Stop the vehicle completely.
3. Turn the ACC system on.
Resetting the Bluetooth System
1. Press the “Phone” button on the steering wheel.
2. Select “Settings.”
3. Select “Reset Bluetooth.”
4. Confirm the reset.
Resetting the Navigation System
1. Turn on the navigation system.
2. Press the “Menu” button.
3. Select “Settings.”
4. Select “Reset Navigation.”
5. Confirm the reset.
Resetting the Powertrain Control Module (PCM)
Caution: Only reset the PCM as a last resort and if you have a professional automotive diagnostic tool.
1. Connect the diagnostic tool to the vehicle’s OBD-II port.
2. Select the “Powertrain Control Module” option.
3. Navigate to the “Reset” function.
4. Confirm the reset.
Wrapping Up
By following these instructions, you can effectively reset your Jeep Renegade to resolve various issues. Remember to consult your vehicle’s owner’s manual for specific details or if you encounter any difficulties.
What You Need to Learn
Q: How often should I reset my Jeep Renegade‘s instrument cluster?
A: You do not need to reset the instrument cluster regularly unless you experience any issues.
Q: Can I reset the Check Engine Light without fixing the underlying issue?
A: No, it is important to diagnose and resolve the issue causing the CEL before resetting it.
Q: Will resetting the PCM erase my vehicle’s history and settings?
A: Yes, resetting the PCM will erase all stored data, including vehicle history and learned settings.