Urgent! how to reset hyundai santa fe service lamp in minutes (hidden trick revealed)

Resetting the service light on your Hyundai Santa Fe is a simple and straightforward task that can be completed in just a few minutes. By following these step-by-step instructions, you can easily clear the service reminder and keep your vehicle running smoothly.

Step 1: Gather Your Tools

To reset the service light, you will need the following tools:

• Owner’s manual
• Flathead screwdriver or key

Step 2: Locate the Diagnostic Connector

Open the driver’s side door and locate the diagnostic connector under the dashboard, to the left of the steering wheel. It is usually a black or gray plastic connector with a small cover.

Step 3: Insert the Key

Insert the flathead screwdriver or key into the small hole on the diagnostic connector cover. Gently pry the cover open to reveal the diagnostic port.

Step 4: Short Circuit the Terminals

Locate terminals 4 and 19 in the diagnostic port. Using the screwdriver or key, short-circuit these two terminals by touching them together.

Step 5: Turn the Ignition On

Turn the ignition key to the “On” position but do not start the engine.

Step 6: Press and Hold the Trip Button

While short-circuiting terminals 4 and 19, press and hold the trip reset button located on the instrument cluster.

Step 7: Release the Terminals

After holding the trip reset button for approximately 10 seconds, release the short circuit between terminals 4 and 19.

Step 8: Turn the Ignition Off

Turn the ignition key to the “Off” position.

Step 9: Start the Engine

Start the engine and check if the service light has been reset. If the light remains on, repeat the steps outlined above.

Step 10: Drive and Verify

Drive your Hyundai Santa Fe for a short distance to verify that the service light has been successfully reset. If the light reappears, consult your owner’s manual or a qualified mechanic.

Additional Tips

• Before resetting the service light, ensure that all necessary maintenance has been performed.
• If you encounter any difficulties during the reset process, refer to your owner’s manual for specific instructions.
• Resetting the service light does not clear any stored fault codes in the vehicle’s computer.

Troubleshooting

• If the service light does not reset after following the steps above, try using a different flathead screwdriver or key.
• Ensure that the connection between terminals 4 and 19 is secure.
• Check the owner’s manual for any model-specific variations in the reset procedure.

Takeaways

By following these simple steps, you can easily reset the service light on your Hyundai Santa Fe and keep your vehicle running in optimal condition. Remember to perform regular maintenance as recommended in your owner’s manual to ensure the longevity and performance of your vehicle.

Frequently Asked Questions

Q: Why does the service light come on?
A: The service light is an indicator that maintenance is due or that there is a potential issue with your vehicle.

Q: How often should I reset the service light?
A: The service light should be reset after all recommended maintenance has been performed.

Q: Can I reset the service light myself?
A: Yes, you can reset the service light yourself by following the steps outlined in this guide.

Q: What if the service light comes back on after I reset it?
A: If the service light comes back on, it may indicate an underlying issue with your vehicle. Consult your owner’s manual or a qualified mechanic for further diagnosis.

Q: Can resetting the service light clear fault codes?
A: No, resetting the service light does not clear any stored fault codes in the vehicle’s computer.