What To Know
- Use the screwdriver or trim removal tool to gently pry open the maintenance light reset button.
- Once the button is open, use a pen or pencil to press and hold the reset button.
- The maintenance light comes on to remind you that your vehicle is due for scheduled maintenance, such as an oil change or tire rotation.
Resetting the maintenance light on your 2016 Toyota 4Runner is a simple procedure that you can perform yourself. By following these step-by-step instructions, you can easily clear the maintenance reminder and keep your vehicle running smoothly.
Step 1: Gather Your Materials
Before you begin, gather the following materials:
- A small screwdriver or trim removal tool
- A pen or pencil
- A piece of paper
Step 2: Locate the Maintenance Light Reset Button
Open the driver’s side door and locate the maintenance light reset button. It is typically found on the lower left side of the instrument panel, near the steering wheel. The button may be labeled “Maintenance” or “Reset.”
Step 3: Insert the Screwdriver or Trim Removal Tool
Use the screwdriver or trim removal tool to gently pry open the maintenance light reset button. Be careful not to damage the button or surrounding trim.
Step 4: Press and Hold the Reset Button
Once the button is open, use a pen or pencil to press and hold the reset button. Hold the button down for approximately 5 seconds, or until the maintenance light begins to flash.
Step 5: Release the Reset Button
Release the reset button once the maintenance light starts flashing. The light will continue to flash for a few seconds and then turn off.
Step 6: Close the Reset Button
Use the screwdriver or trim removal tool to gently close the maintenance light reset button. Ensure that the button is secure and flush with the surrounding trim.
Step 7: Verify the Reset
Start the engine and let it idle for a few minutes. The maintenance light should remain off, indicating that the reset was successful.
Tips for Resetting the Maintenance Light
- If the maintenance light does not reset after following these steps, consult your Toyota owner’s manual or contact a qualified mechanic.
- Some 2016 Toyota 4Runner models may have a different maintenance light reset procedure. Refer to your owner’s manual for specific instructions.
- Resetting the maintenance light does not reset the maintenance schedule. It is still important to have your vehicle serviced according to the manufacturer’s recommended maintenance schedule.
Troubleshooting
If you encounter any issues while resetting the maintenance light, try the following troubleshooting tips:
- Make sure that the engine is off and the ignition key is in the “off” position.
- Ensure that you are pressing the correct reset button. It may be labeled “Maintenance” or “Reset.”
- Try pressing and holding the reset button for a longer period of time (up to 10 seconds).
- If the maintenance light still does not reset, consult a qualified mechanic for assistance.
In a nutshell
Resetting the maintenance light on your 2016 Toyota 4Runner is a simple and straightforward procedure. By following these step-by-step instructions, you can keep your vehicle’s maintenance system up-to-date and ensure that your 4Runner is running at its best.
Questions You May Have
Q: Why does the maintenance light come on?
A: The maintenance light comes on to remind you that your vehicle is due for scheduled maintenance, such as an oil change or tire rotation.
Q: How often should I reset the maintenance light?
A: You should reset the maintenance light after every scheduled maintenance service.
Q: Can I reset the maintenance light myself?
A: Yes, you can reset the maintenance light yourself by following the steps outlined in this guide.