Effortless guide: reset your 2013 nissan rogue oil light like a pro

What To Know

  • If you don’t have a key, you can use a screwdriver or other thin object to insert into the small slot next to the ignition.
  • If your oil light turns on after an oil change, it could be due to a faulty oil level sensor or a problem with the oil filter.
  • No, the trip computer button is the only way to reset the oil light in a 2013 Nissan Rogue.

If you’re a 2013 Nissan Rogue owner, you may encounter a situation where your oil light turns on, indicating it’s time for an oil change. While it’s crucial to address this maintenance task promptly, you can easily reset the oil light yourself to keep track of future oil changes. This blog post will provide a comprehensive guide on how to reset the 2013 Nissan Rogue oil light effectively.

Step 1: Gather Necessary Tools

Before starting the reset process, ensure you have the following tools on hand:

  • Pen or pencil
  • Paper
  • Key or screwdriver (optional)

Step 2: Locate the Trip Computer Button

In the dashboard of your 2013 Nissan Rogue, locate the trip computer button. It’s usually situated on the left side of the steering wheel, near the instrument cluster.

Step 3: Reset the Trip Computer

Press and hold the trip computer button until the display resets to zero. This may take a few seconds.

Step 4: Insert the Key or Screwdriver

Insert your key into the ignition and turn it to the “ON” position without starting the engine. If you don’t have a key, you can use a screwdriver or other thin object to insert into the small slot next to the ignition.

Step 5: Press and Hold the Gas Pedal

While keeping the key or screwdriver in the “ON” position, press and hold the gas pedal all the way down for approximately 10 seconds.

Step 6: Release the Gas Pedal and Key/Screwdriver

Once 10 seconds have passed, release the gas pedal and remove the key or screwdriver from the ignition.

Step 7: Turn the Ignition to “ON”

Turn the key in the ignition to the “ON” position again without starting the engine.

Step 8: Press and Hold the Trip Computer Button Again

Press and hold the trip computer button once more until the oil light turns off. This may take a few seconds.

Step 9: Start the Engine

Start the engine of your 2013 Nissan Rogue. The oil light should now be reset.

Recommendations

Resetting the oil light in your 2013 Nissan Rogue is a straightforward procedure that can be completed in just a few minutes. By following these steps, you can effectively monitor your oil change intervals and ensure your vehicle operates smoothly. Remember to consult your owner’s manual for specific details and any additional information related to your vehicle’s maintenance schedule.

Common Questions and Answers

Q: Why does my oil light turn on even after I’ve changed the oil?

A: If your oil light turns on after an oil change, it could be due to a faulty oil level sensor or a problem with the oil filter. Check the oil level using the dipstick to ensure it’s at the correct level. If the level is low, add oil as needed. If the level is correct, contact a qualified mechanic to inspect the sensor and filter.

Q: Can I reset the oil light without using the trip computer button?

A: No, the trip computer button is the only way to reset the oil light in a 2013 Nissan Rogue.

Q: How often should I change my oil in my 2013 Nissan Rogue?

A: The recommended oil change interval for a 2013 Nissan Rogue is every 5,000 miles or 6 months, whichever comes first. However, it’s always best to consult your owner’s manual for specific maintenance intervals based on your driving habits and conditions.