What To Know
- Replacing a Nissan Murano door handle may seem like a daunting task, but with the right tools and a bit of patience, it’s a job that can be accomplished by most DIYers.
- Replacing a Nissan Murano door handle is a relatively straightforward task that can save you a significant amount of money compared to having it done by a mechanic.
- Can I replace the door handle myself or should I hire a mechanic.
Replacing a Nissan Murano door handle may seem like a daunting task, but with the right tools and a bit of patience, it’s a job that can be accomplished by most DIYers. This comprehensive guide will provide you with step-by-step instructions on how to replace a Nissan Murano door handle, whether it’s the front or rear door.
Tools and Materials Required
- New Nissan Murano door handle
- Phillips head screwdriver
- Flathead screwdriver
- Trim removal tool (optional)
- Socket wrench with 10mm socket
- Electrical tape
- Zip ties
Step-by-Step Instructions
1. Safety First
Before starting any work, disconnect the negative terminal of your battery to prevent electrical shocks.
2. Remove the Door Panel
- Use a trim removal tool (or a flathead screwdriver) to carefully pry up the door panel around the edges.
- Remove the Phillips head screws holding the door panel in place.
- Disconnect the electrical connectors for the window switch, door lock, and any other components.
- Gently lift the door panel up and away from the door.
3. Locate the Door Handle Assembly
- Once the door panel is removed, you will see the door handle assembly. It is typically held in place by two or three bolts.
4. Disconnect the Electrical Connector
- Unplug the electrical connector from the door handle assembly.
5. Remove the Bolts
- Use a 10mm socket wrench to remove the bolts holding the door handle assembly in place.
6. Remove the Door Handle Assembly
- Carefully pull the door handle assembly out of the door. Note the orientation of the assembly for proper reinstallation.
7. Install the New Door Handle Assembly
- Insert the new door handle assembly into the door.
- Tighten the bolts to secure it in place.
- Reconnect the electrical connector.
8. Reinstall the Door Panel
- Lift the door panel back into place.
- Reconnect the electrical connectors for the window switch, door lock, and any other components.
- Secure the door panel with the Phillips head screws.
- Snap the door panel trim back into place.
9. Test the Door Handle
- Reconnect the negative terminal of the battery.
- Test the door handle to ensure it is operating smoothly.
Additional Tips
- If the door handle is not working properly after replacement, check the electrical connections to ensure they are secure.
- Use zip ties to secure any loose wires or cables.
- Wrap electrical tape around any exposed wires for added protection.
Summary: Regaining a Grip on Your Murano
Replacing a Nissan Murano door handle is a relatively straightforward task that can save you a significant amount of money compared to having it done by a mechanic. By following these step-by-step instructions, you can ensure a successful repair and restore the functionality of your door handle.
Basics You Wanted To Know
Q: Can I replace the door handle myself or should I hire a mechanic?
A: Replacing a door handle is a DIY-friendly task that can be accomplished with minimal experience.
Q: How long does it take to replace a door handle?
A: The replacement process typically takes around 30-60 minutes per door.
Q: What are the most common reasons for a door handle to break?
A: Door handles can break due to excessive wear and tear, accidental damage, or corrosion.