Step-by-step guide: replace the rear wiper on your jeep renegade in minutes

by

What To Know

  • Replacing a rear wiper blade on your Jeep Renegade is a straightforward task that can be completed in a matter of minutes.
  • Once the wiper arm is lifted, you will see a small hook or tab on the underside of the old wiper blade.
  • The cost of a new rear wiper blade can vary depending on the type and brand, but it typically ranges from $10 to $25.

Replacing a rear wiper blade on your Jeep Renegade is a straightforward task that can be completed in a matter of minutes. Follow these step-by-step instructions to ensure a quick and hassle-free replacement:

Materials Needed:

  • New rear wiper blade
  • Clean cloth or towel

Safety First:

  • Park your vehicle on a flat, stable surface.
  • Engage the parking brake to prevent the vehicle from moving.

Step 1: Locate the Rear Wiper Arm

  • Walk to the rear of your Jeep Renegade and locate the rear wiper arm. It is typically located on the driver’s side of the rear window.

Step 2: Lift the Wiper Arm

  • Gently lift the rear wiper arm away from the rear window. Do not force it, as you may damage the arm or the window.

Step 3: Unhook the Old Blade

  • Once the wiper arm is lifted, you will see a small hook or tab on the underside of the old wiper blade.
  • Press down on the hook or tab and slide the old blade off the arm.

Step 4: Install the New Blade

  • Align the new wiper blade with the wiper arm and slide it onto the hook or tab.
  • Ensure that the blade is securely attached and will not come off during operation.

Step 5: Lower the Wiper Arm

  • Carefully lower the wiper arm back onto the rear window.
  • Apply gentle pressure to ensure it is properly seated.

Step 6: Clean the Rear Window

  • Use a clean cloth or towel to wipe down the rear window.
  • This will remove any dirt or debris that may interfere with the new wiper blade’s performance.

Step 7: Test the Rear Wiper

  • Start your Jeep Renegade and turn on the rear wiper.
  • Observe the wiper’s movement and ensure that it is wiping the rear window effectively.

Troubleshooting Common Issues:

Wiper Blade Not Wiping Properly:

  • Check if the wiper blade is installed correctly and securely.
  • Inspect the wiper arm for any damage or obstructions.
  • Clean the rear window thoroughly to remove any dirt or debris.

Wiper Arm Not Moving:

  • Check if the wiper motor fuse is blown.
  • Inspect the wiring harness for any loose connections or damage.
  • Consult a qualified mechanic for further assistance.

Wiper Fluid Not Spraying:

  • Refill the wiper fluid reservoir.
  • Check the wiper fluid lines for any leaks or blockages.
  • Clean the wiper fluid nozzles to remove any debris.

Wrapping Up:

Replacing the rear wiper blade on your Jeep Renegade is a simple and straightforward task that can be completed in minutes. By following the steps outlined in this guide, you can ensure that your rear window remains clean and clear, providing you with optimal visibility during adverse weather conditions.

Q: How often should I replace my rear wiper blade?
A: It is recommended to replace your rear wiper blade every 6-12 months, or sooner if it shows signs of wear or damage.

Q: Can I use a different type of wiper blade than the original?
A: Yes, you can use a different type of wiper blade, but make sure it is the correct size and type for your Jeep Renegade.

Q: What is the cost of replacing a rear wiper blade?
A: The cost of a new rear wiper blade can vary depending on the type and brand, but it typically ranges from $10 to $25.