What To Know
- Removing the jack from your Rogue is a crucial step in this process, and understanding how to do it correctly is essential for your safety and the well-being of your vehicle.
- Use the jack handle to pump the jack until it raises the vehicle slightly off the ground.
- Once the flat tire is clear of the ground, loosen the handle on the jack.
If you’re a Nissan Rogue owner, you’ll inevitably encounter a situation where you need to change a flat tire. Removing the jack from your Rogue is a crucial step in this process, and understanding how to do it correctly is essential for your safety and the well-being of your vehicle.
Safety First
Before you begin working with your jack, ensure your Nissan Rogue is parked on a flat, stable surface. Engage the parking brake to prevent the vehicle from rolling. Gather all necessary tools, including the jack, jack handle, and wheel chocks.
Locate the Jack
The jack for your Nissan Rogue is typically stored under the cargo area in the trunk. Locate the access panel or latch and open it to reveal the jack.
Remove the Jack
1. Retrieve the Jack: Lift the jack out of its storage compartment.
2. Insert the Jack Handle: Locate the jack handle, which is usually stored nearby. Insert the handle into the designated hole on the jack.
3. Secure the Handle: Tighten the handle onto the jack until it feels snug.
4. Lift the Jack: Use the jack handle to pump the jack until it raises the vehicle slightly off the ground.
5. Place Wheel Chocks: Position wheel chocks behind the wheels opposite the flat tire to prevent the vehicle from rolling.
Lower the Jack
1. Release the Handle: Once the flat tire is clear of the ground, loosen the handle on the jack.
2. Slowly Lower the Vehicle: Gradually release pressure on the jack by turning the handle in the opposite direction.
3. Remove the Jack: Once the vehicle is fully lowered, remove the jack from beneath the vehicle.
Stow the Jack
1. Collapse the Jack: Use the handle to collapse the jack to its original size.
2. Clean the Jack: Wipe down the jack with a clean cloth to remove any dirt or debris.
3. Store the Jack: Place the jack back into its designated storage compartment in the trunk.
Troubleshooting
Jack Won’t Lift the Vehicle
- Check that the jack is securely inserted into the designated jack points.
- Ensure the jack handle is properly attached and tightened.
- If the jack still won’t lift the vehicle, consult your Nissan Rogue owner’s manual or seek professional assistance.
Jack Is Stuck
- Try spraying penetrating oil on the jack’s mechanism to lubricate it.
- Use a rubber mallet to gently tap on the jack’s handle or base.
- If the jack remains stuck, contact a mechanic for assistance.
Important Tips
- Never use the jack to support the entire weight of the vehicle.
- Always place the jack on a stable surface.
- Inspect the jack regularly for any damage or wear.
- If you’re not comfortable removing the jack yourself, don’t hesitate to call for roadside assistance.
Wrap-Up
Removing the jack from your Nissan Rogue is a simple but crucial task that every owner should know. By following these steps, you can safely and easily change a flat tire and keep your Rogue running smoothly. Remember to prioritize safety, handle the jack with care, and seek professional assistance if you encounter any difficulties.
What People Want to Know
Q: Where is the jack located in a Nissan Rogue?
A: The jack is typically stored under the cargo area in the trunk.
Q: What tools do I need to remove the jack?
A: You’ll need the jack, jack handle, and wheel chocks.
Q: How do I prevent the vehicle from rolling while the jack is in use?
A: Place wheel chocks behind the wheels opposite the flat tire.