Battery blues? learn the secrets to revitalizing your subaru forester key fob

Replacing the battery in your Subaru Forester key fob is a quick and easy task that you can do yourself. Here’s a step-by-step guide to help you get it done:

Tools and Materials You’ll Need

• New CR2025 battery
• Small flathead screwdriver or key

Step 1: Locate the Key Fob Battery Compartment

The battery compartment is usually located on the back of the key fob. Look for a small, round or rectangular cover that is held in place by a screw or a latch.

Step 2: Remove the Battery Compartment Cover

Using the flathead screwdriver or key, gently pry open the battery compartment cover. Be careful not to damage the cover or the key fob.

Step 3: Remove the Old Battery

Once the battery compartment cover is removed, you will see the old battery. Use your finger or a small tool to carefully remove the old battery.

Step 4: Insert the New Battery

Take the new CR2025 battery and insert it into the battery compartment with the positive (+) side facing up. Make sure the battery is seated correctly.

Step 5: Replace the Battery Compartment Cover

Once the new battery is in place, replace the battery compartment cover. Press down on the cover until it clicks into place.

Step 6: Test the Key Fob

After replacing the battery, test the key fob to make sure it is working properly. Press the buttons on the key fob and make sure they are sending a signal to the car.

Step 7: Dispose of the Old Battery Properly

Dispose of the old battery properly according to local regulations. Do not throw the battery away in the trash, as it can be harmful to the environment.

Tips for Replacing Your Subaru Forester Key Fob Battery

• If the battery compartment cover is difficult to open, try using a small flathead screwdriver or key to gently pry it open.
• Be careful not to damage the battery compartment cover or the key fob when removing the cover.
• Use a new CR2025 battery for the best results.
• Dispose of the old battery properly according to local regulations.

Troubleshooting

If you are having trouble replacing the battery in your Subaru Forester key fob, here are some troubleshooting tips:

• The key fob is not working after replacing the battery. Make sure the battery is inserted correctly with the positive (+) side facing up. Also, check the battery compartment cover to make sure it is closed properly.
• The battery is draining quickly. If the battery is draining quickly, there may be a problem with the key fob or the car’s electrical system. Have the key fob and the car inspected by a qualified technician.

The Bottom Line

Replacing the battery in your Subaru Forester key fob is a simple task that you can do yourself. By following the steps outlined in this guide, you can ensure that your key fob is working properly and that you have a spare battery on hand in case of an emergency.

Frequently Asked Questions

Q: How often should I replace the battery in my Subaru Forester key fob?
A: The battery in your Subaru Forester key fob should be replaced every 2-3 years, or more often if you use the key fob frequently.

Q: Can I use any type of battery in my Subaru Forester key fob?
A: No, you should only use a CR2025 battery in your Subaru Forester key fob. Using the wrong type of battery can damage the key fob.

Q: Where can I dispose of old key fob batteries?
A: You can dispose of old key fob batteries at most electronics stores or battery recycling centers. Do not throw the batteries away in the trash, as they can be harmful to the environment.